Average concrete pavers patio: 400 sq ft
Industry avg for concrete pavers: $1.10/sq ft
Estimated Time
2.0 hrs
Sealer (2 coats)
~5.3 gal
Effective Rate
$1.10/sqft
Hourly Rate
$220/hr
Concrete Pavers (400 sq ft) in your area
Sign up and this estimate becomes a draft quote in your account. Add your customer's email and send it from there. The free plan covers 3 quotes a month.
You just calculated: Paver sealing — $440.00 (400 sq ft)
Send this $440.00 quote free →Takes about a minute, and the numbers come with you.
Manage estimates, jobs, and customers in one field-service workspace.
Get Started FreeFree plan forever · Pro trial available
Quick answer: paver sealing cost per sq ft
Paver sealing typically costs $0.50 to $2.50 per sq ft, with most jobs averaging $1.00 to $1.50 per sq ft. A standard 400 sq ft patio runs $400 to $800. Concrete pavers cost $0.80-$1.50 per sq ft to seal, brick $1.00-$1.80, natural stone $1.20-$2.50, and stamped concrete $0.60-$1.20. Two coats of sealer is standard, and one gallon covers about 150 sq ft per coat, so a 400 sq ft patio needs roughly 5 gallons for two coats. Wet-look solvent sealers cost about 30 percent more than matte water-based sealers. Set a minimum job price of $250 and re-sand joints with polymeric sand before sealing.
Paver sealing is priced per square foot, and the rate depends on the paver material, how much cleaning and prep the surface needs, and whether the customer wants a matte or a wet-look finish. Get those three inputs right and your estimate stays profitable.
Most contractors charge $0.50 to $2.50 per square foot, averaging $1.00 to $1.50. A standard 400 sq ft patio runs $400 to $800. Two coats is standard, and sealer covers about 150 square feet per gallon per coat, so factor material into your rate. Set a minimum job price of $250 to cover mobilization on small patios.
| Surface | Cost / Sq Ft | Notes |
|---|---|---|
| Concrete Pavers | $0.80 – $1.50 | Most common |
| Brick | $1.00 – $1.80 | Clay pavers |
| Natural Stone | $1.20 – $2.50 | Travertine, flagstone |
| Stamped Concrete | $0.60 – $1.20 | Broom or stamped slab |
Two coats is standard and sealer covers about 150 sq ft per gallon per coat. Wet-look solvent sealers cost roughly 30 percent more than matte water-based sealers. Re-sand joints with polymeric sand before sealing for a cleaner, more stable finish.
Paver sealing typically costs $0.50 to $2.50 per square foot, with most jobs averaging $1.00 to $1.50 per square foot. A standard 400 sq ft patio runs $400 to $800. The price depends on the paver material, how much prep and cleaning is needed, and whether you use a matte water-based or a premium wet-look sealer.
Paver sealer covers about 150 square feet per gallon per coat, and two coats is standard. So a 400 sq ft patio needs roughly 400 x 2 / 150, or about 5.3 gallons. Porous pavers and rough stamped concrete absorb more and cover less, so buy 10 percent extra to be safe.
Two coats is the standard for paver sealing. The first coat penetrates and primes the surface, and the second builds the protective film and the sheen. Apply the second coat before the first fully cures, and avoid over-applying wet-look sealer, which can trap moisture and turn white.
Concrete pavers cost $0.80 to $1.50 per square foot to seal, brick $1.00 to $1.80, natural stone like travertine and flagstone $1.20 to $2.50, and stamped concrete $0.60 to $1.20. Natural stone costs more because it needs a breathable sealer and careful application to avoid a hazy finish.
Most pavers should be resealed every 3 to 5 years, depending on sun exposure, traffic, and the sealer used. Wet-look solvent sealers tend to need more frequent reapplication than matte water-based sealers. Reseal sooner if water stops beading on the surface.
Yes. Re-sand the joints with polymeric sand before sealing whenever the existing joint sand is low or washed out. The sealer locks the polymeric sand in place, which stabilizes the pavers, reduces weeds, and gives a cleaner finished look. Skipping this step is the most common paver sealing mistake.
